|
Product Details:
|
| Operating Conditions: | Clean And Non-corrosive Liquids | Speciflcation: | Shaft Hole 31.75 |
|---|---|---|---|
| Extra Service: | Oem Is Ok | Seal Design: | Balanced, Standard |
| Secondary Sealing: | SIC SIC | Transport Package: | YUEMI Standard Or Customised |
| Seals Type: | Sanitary Pumps | Performance: | High Pressure |
| Spring Type: | Single Or Multiple Springs | Product: | Water Pump Seal |
| Face Material: | Carbon | Processing: | Drawing Basis |
| Highlight: | Grundfos Mechanical Seal Cartridge Seals,Cdl Cdlf 31.75 Mechanical Seal |
||
Mechanical seal-multiple spring which are availble in a wide varietyh of elastomers for handing practically every industril fluid. All components are held togther by a snap ring in a unized construction design and can be repaired easily on-site.
High Quality Multiple Spring O-ring Mechanical Seals
Description:
Replacement to:
Suitable for CR, CRN, and CRI series Pumps
1. Operational Conditions:
Temperature: -20ºC to +180ºC
Pressure: ≤2.5MPa
Speed: ≤15m/s
2. Materials:
Stationary Ring: Ceramic, Silicon Carbide, TC
Rotary Ring: Carbon, Silicon Carbide
Secondary Seal: NBR, EPDM, Viton, PTFE
Spring and Metal Parts: Steel
3. Seat Type:
4. Applications: Clean water, sewage water, oil and other moderately corrosive fluids
| Operational Conditions: | ||
| Temperature: | -20ºCto+180ºC | |
| Pressure: | ≤2.5MPa | |
| Speed: | ≤15m/s | |
| Materials: | ||
| Stationary Ring: | V1,Q1,Q2,U2 | |
| Rotary Ring: | B,A,Q1,Q2 | |
| Secondary Seal: | P,E,V,M1,M2 | |
| Spring and Metal Parts: | F,G,M | |
| Seat Types: | ||
| Standard Size: | 31.75 | |
| Alternative: | ||
| Applications: |
Clean water, sewage water, Oil and other moderately corrosive fluids |
|
Temperature
|
-20ºC to 200ºC, dependent on the elastomer
|
|
Pressure
|
Up to 25 bar
|
|
Speed
|
Up to 20 m/s
|
|
Sizes
|
31.75
|
|
Face
|
Carbon, SiC, TC
|
|
Seat
|
SiC, TC
|
|
O-rings
|
NBR, EPDM, VITON, Aflas, Kalrez, Chemraz etc.
|
|
Spring
|
SS304, SS316
|
|
Metal parts
|
SS304, SS316
|
Q:What is your MOQ?
A: For normal products, we don't have MOQ request; For customized products, special products or if you have special requirements like materials
Q:Can your factory print our logo/brand on the product?
A: Yes, we can open mold with your logo or brand
Q: Can your factory print our logo/brand on the package?
A: Yes, we can print your logo or brand on the package,
Q: Can I visit you?
A: Yes. Our factory is in Wenling, Taizhou, the international pump industry center. Welcome to visit our factory, look forward to meeting with you.
Contact Person: ZENG
Tel: +8617620005542
